Present position : HOME >> ALL PRODCTS >> MACHINE TOOL ACCESSORIES >> WORKING TABLE SERIES

VERTICAL OR HORIZONTAL TURNING WORKTABLE

This unit is one of the main accessory that be used on milling machine, it can be finished the following work:

1. round cutting the curved surface cutting of workpiece.

2. the cutting of the surface that have a angle to the pointing base.

3. when the table surface vertical working with the tail-stock, it can work drilling with indexing or milling to the workpiece complicated. It can be used on driller, miller and inserting machine to finish one or any more working above. The workpiece can be calmped by the fixture or at firsthand.

Model	TK13100	T13100	T13160	T13200	T13250
Parallelism of center line of spindle	0.03mm	0.03mm	0.02mm	0.025mm	0.025mm
Parallelism of worktable surface	0.02mm	0.02mm	0.015mm	0.02mm	0.02mm
Run-out of wortable surface	0.015mm	0.015mm	0.015mm	0.02mm	0.02mm
Parallelism of worktable surface to base surface	0.025mm	0.025mm	0.015mm	0.02mm	0.02mm
Dividing accuracy of worktable	90”	90”	90”	90”	90”
Dia of worktable	100mm	100mm	160mm	200mm	250mm
Run-out of center line of spindle	0.02mm	0.02mm	0.02mm	0.02mm	0.02mm
Height of center(vertical)	70mm	70mm	140mm	150mm	170mm
Transmission rate	1:90	1:90	1:90	1:90	1:90
Work hole taper	MS2	MS2	MS2	MS4	MS3

ALL PRODCTS

Search Contact

	jackli1980@hotmail.com
	jack li

Contact us

Head Office: No.99, Section 1, North First Ring Road, Jinniu District Chengdu, Sichuan Province. China

Tel: 86-28-87769009, 61365700, 62569686, 62566182

Fax: +86-28-86752619

Email: sales@sc-mightytools.com

Core Factories/Workshops:
● N0.1 jianshe RD., Jiangyang City, Sichuan
● Xixiashu Town, Xinbei District, Changzhou, Jiangsu
● Xiaoshan District, Hangzhou, Zhejiang
● Beihu RD, Jining City, Shandong