Model | D70-4V |
Coordinate | 1/2/3/4 |
Voltage range | AC180v~260V 50HZ/60HZ |
Power consumption | 10VA |
Working temperature | 0~45°C |
Storage temperature | -30~70°C |
Size(length ,width, height) | 300 180 80mm |
Readout box input signal | TTL/ELA-422-A |
Resolution | 0.1um/0.5um/1.0um/5.0um/10.0um |
Linear scale voltage | +5V |
Display | 7 bit display with signed |
Frequency | <600khz |
D70 Function introduction
1) Circular drilling function: Digital readout can automatically calculate the location of the hole according to the inputted data
2 ) Linear drilling function: Opposite to the axis of any angle, only the hole spacing remain fixed value, The DRO can calculate the location of the hole according to the inputted data
3) Tool radius compensation: In the use of cylindrical milling tool carrier, the tool radius must be taken into account. The direction of process will decide the increase or decrease of calculated value .Once the tool number is inputted, the DRO value will be saved.
4) Determine the workpiece center: Only through the tool or touching the two points of workpiece, the DRO can calculate the workpiece center
5) 200 sets tool base: While repeat the same process in the workpiece, you can store the tool value which will be convenience to the operator
6) Round arc processing: Sample round processing and two axis arc processing
7) Function calculator: Calculator function can improve operation efficiently
8) Slope calculation: Input the two points of workpiece, the DRO can calculate the slope of the workpiece.
9) Z-axis combination calculation: Zaxis can display the combination displacement of two parallel axis
10) Preset value: Preset the radius of workpiece
11) Linear scale error compensation or non-linear scale error compensation:Compensation to ensure absolute precision and maxmium efficiency.Multi-point compensation can reduce the machine error.
12) Numerical filtering function
13) EDM depth control: Can assist tool make depth control efficiently
14)Rotary speed function(RPM): Can display the rotary speed of machines
Lathe machine bracket and milling machine bracket
Accessory
One digital readout
A set of mounting bracket
One earthing wire and power line
One operating instruction manual
One certification
jackli1980@hotmail.com | |
jack li |
Head Office: No.2 Tongfu Alley Xiyulong Str, Chengdu, Sichuan, P.R.China. 610015
Tel: +86-28-86741513 86751889-8772
Fax: +86-28-86752619
Email: sales@sc-mightytools.com
Core Factories/Workshops:
● N0.1 jianshe RD., Jiangyang City, Sichuan
● Xixiashu Town, Xinbei District, Changzhou, Jiangsu
● Xiaoshan District, Hangzhou, Zhejiang
● Beihu RD, Jining City, Shandong
Copyright ©2005-2024 MIGHTY-TOOLS-SCMC All Rights Reserved.
Head Office: No.2 Tongfu Alley Xiyulong Str, Chengdu, Sichuan, P.R.China. 610015 蜀ICP备05013644号
Tel: +86-28-86741513 86751889-8772 Fax: +86-28-86752619 Email: sales@sc-mightytools.com Technical support9 Beidou network